2024-04-16

肉のいとう　鶏つみれ　焼き鳥

三流外資系サラリーマン大家障害者です。

ケチケチ自炊の為に肉のいとうさん本店で鶏つみれと焼き鳥を購入

（肉のいとうさんは高級仙台牛のお店だけど庶民的なお肉も販売中）

鶏団子（テキトー）入りの味噌汁が出来ました。

これだけの食材で750円程

贅沢になって来たのう笑

[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]

[簡易包装]杜の都仙台名物熟成肉厚牛たん塩味 500g（1パック／3〜4人分）焼き方レシピ付き沸騰ワード10 [ 熟成牛タン牛肉焼肉お取り寄せ仙台名物宮城ご当地グルメ自宅用訳ありワケあり箱なしあす楽 ][冷凍配送]
価格：5,880円（税込、送料無料) (2024/3/18時点)

楽天で購入

2024-04-15

市販宅建テキスト　合格ギリギリか?

三流外資系サラリーマン大家障害者です。

宅建の試験勉強をしておりますが市販の大手予備校のテキストはけっこう情報量が少ない。

過去問を解いてもテキストに記載されていない箇所がどんどん出てくる。

しっかり万全にという触れ込みだが、合格点ギリギリを取れるかどうかという感じ。

しかもひっかけ対策もめちゃくちゃしなければならない。

楽勝合格には程遠い

ネットの怪しい個人の合格講座やLEC等の大手予備校の講座に行くのが一番早いように思われる。

恐らく合格講座では市販テキストには載っていないポイントの解説があると思われる。

そうしないと講座の意味がないもんね

独学はお金がかかりませんが、情報量も乏しいしけっこう大変です。

時間を無駄にしてしまいます。

手っ取り早く資格を取るなら課金やな笑

世の中カネや笑

大学受験と同じで、やり方だけや

もはやどのテキストが良いのかわけが分からなくなって来ましたがひとまず過去問を腐る程やって手術して歩行出来るようになれば受けてみよう。

まともに歩行出来ず、立つと足の感覚が無くなり、座ってても陰部や肛門が常時シビレて感覚が無くなっている病人が勉強してるだけでも大したもんですが、クソ汚いひっかけ設問と知識暗記型の宅建試験には私はあまり向いていないのは事実です。

出来る事なら英語と中国語に時間を使いたいが乗りかかってしまったので時間のムダだがやるしかない。笑

マジメにやると目標までの距離感が分かって来た。

宅建士「わかって合格る」2冊セット [ TAC宅建士講座 ]
価格：6,050円（税込、送料無料) (2024/4/13時点)

楽天で購入

2024-04-14

外資系企業の英語と京大英語

三流外資系サラリーマン大家障害者です。

京大英語と比較しても外資系企業のコーポレートブログの方が分かりやすいというこの事実

そもそも英語は語学だから誰でも出来るのです。宅建に比べれば京大英語も簡単

宅建でチマチマ不動産屋でカネ稼ぐより、旧帝大卒業して、英語ちょっと出来て外資に入って給料1000万円オーバー、海外赴任でメイド付、退職金優遇を狙った方がずっとカネを稼ぐハードル低くてイージーモードなのでコスパが高い笑

宅建受かる実力あればマーチ、関関同立は楽勝で行ける。努力のタイミングが重要やで

外資の英語もそんなに難しくない、早いだけ

参考

外資系企業のネーミングルールについて

Cat® Product Nomenclature: A Behind-The-Scenes Look At Equipment Names
Does the “D” stand for “Dozer”? Why is that loader called a “950”? You’ve got questions about Cat® product names, so we went straight to the expert for answers.

By Caterpillar

Published: Mar 12, 2024

“What’s in a name?”

Shakespeare posed that question in Romeo and Juliet. Tom Zilla ponders it every day.

As a product identity consultant for the brand team at Caterpillar, a big part of Tom’s job revolves around nomenclature. That’s what we call the name — or more frequently, the number — you see on the side of our heavy equipment, industrial engines, gensets and other products.

What’s the logic behind those numbers and letters? Where do they come from and what do they mean? We sat down with Tom to get the inside scoop.

“Nomenclature” Is Kind Of A Fancy Word. What Does It Mean To Caterpillar And Why Is It Necessary?
Tom: For us, nomenclature is simply a name or designation for our products. It’s how we speak to our customers about our machines and engines — a common language, so to speak. All manufacturers use nomenclature, although every company approaches it a bit differently. Just look at your car or your mobile phone. Every product has a name. It’s not exclusive to heavy machinery.

You Sit In Caterpillar’s Corporate Brand Group. How Does Product Nomenclature Related To The Brand?
Tom: There’s a direct link. The Cat brand is known for being strong and straightforward, and that’s reflected in our product names and naming strategy. We try to keep our nomenclature as simple as possible, maintain continuity across our product lines and leverage what our customers already understand. One of the luxuries of being a company that’s been around for almost 100 years is that people for the most part have a good handle on what we offer. We try not to overcomplicate it.

Speaking Of That History, Can You Tell Us The First Cat Product To Have An Official Name? What About The Product That’s Had Its Name The Longest?
Tom: Product nomenclature has been around since the onset of Caterpillar Tractor Company in 1925. The “Twenty” was one of the first models. Back then, tractors literally were replacing horses on the job, so the name represented the work 20 horses could do. As for the longest-standing name, I believe the “D” designation on our dozers goes back well over 80 years.

[We double-checked with the Caterpillar corporate archives, and Tom’s right: The Model Twenty Tractor, released in 1927, was the first product introduced by the Caterpillar Tractor Company, although several tractors made by the Holt Manufacturing Company and the C.L. Best Tractor Co. did become part of the original Cat product line. That included the Holt 2-Ton, 5-Ton and 10-Ton along with the Best Sixty and Thirty. And the D series of track-type tractors is indeed the oldest product line, launched in 1937. Today’s Cat dozers still bear a “D” as part of their names.]

Cat D4 machine
If The “Twenty” Represented 20 Horsepower, Are Current Product Names Also Associated With Equipment Size And Power?
Tom: For the most part, yes, although it’s not a direct correlation. Model number increments tend to go up and down based on the size of the product. Generally, the smaller the number, the smaller the machine. As things like weight and horsepower increase, so does the model number. In our wheel loader family, for example, the 950 falls in the middle of the lineup. The 995 is the largest; the 901 is the smallest.

It works similarly on the electric power side of the business. Some genset model numbers tie back to power output; others link to engine models. It’s the same with engines. Displacement grows with many model numbers.

Can You Take Us Through The Process Of Naming A New Product?
Tom: Product identity and nomenclature is built into our new product introduction (NPI) process at Caterpillar. That’s how we manage a product rollout from start to finish. If it’s a completely new product, we work closely with the product development team to conduct market research and learn what’s already been established in the industry. Our customers don’t want to waste time translating a name into something they understand, so we work hard to leverage what already exists.

If it’s a generational increment of an existing product, obviously that’s easier. We want to build on the equity that’s already established in many of these machines and engines that have been around for decades.

Some Companies Don’t Use The Number 13 Because It’s Associated With Bad Luck. Are There Any Numbers Or Letters That Caterpillar Avoids In Product Nomenclature?
Tom: We do tend to avoid the letter “I” because it’s easily confused with the number “1.” And in some cases, we might steer away from certain numbers or letter combinations because of different cultural meanings or perceptions. The goal is always to make it clear and simple for the customer.

You’ve Made Some Changes To Nomenclature In Recent Years, Most Notably Eliminating Letter Designations On Some Machines. Why?
Tom: We used to include series letters to denote generational differences between products. For example, the 740C represented the third generation of that articulated truck; when we introduced the fourth generation, we named it the 740D.

It was a good system that was beloved by many of our customers, but we started running out of letters in the alphabet for some our product lines. That’s one of the good problems that comes with being in business for a century! With the frequency of updates and changes on some machines, we realized using series letters just wasn’t sustainable going forward. We had to think longer term.

That’s why we eliminated the series letter — so now it’s simply a 740 articluated truck. On every product’s PIN plate, though, there’s a three-character build number that denotes the generation, so that information is still available for customers when they need it.

Cat 740GC
What About The Letters “GC” And “XE” That We See On Certain Machines — What Do Those Mean?
Tom: Those letters are meant to help customers differentiate between different levels of equipment, similar to trim levels in the automotive industry. If you see “GC” on a machine, that’s a focused value offering. It features the reliability and durability you expect from Caterpillar plus low operating costs, basic features and simple technology. “XE” represents our premium, market-leading models — those that may have the highest levels of technology, productivity and fuel efficiency. In between are our performance models.

Some Models Have Trade Dress With A Blue Hexagon Instead Of Red. What’s That About?
Tom: It’s there to indicate a fully electrified product. Some customers have probably seen the blue nomenclature and trade dress graphics on our prototype machines at various trade shows or in press release photos over the past several months. We chose blue to signify and showcase our unique powertrain offerings and distinguish our fully electric machines on the jobsite.

What’s Your #1 Tip For Customers Trying To Decipher Cat Product Nomenclature?
Tom: Don’t overthink it. It’s fairly straightforward once you get into a specific product line. And if you have questions, your dealer is always there to help you understand the differences between products and determine which one is the best fit for your business.

Big thanks to Tom for this behind-the-scenes look at how Cat heavy equipment, industrial engines and gensets get their names!